After closing your pool, especially for the winter, you have to cover it with the best pool cover. With time, the cover collects water and debris. It can also be that you closed the pool for the weekend, and it rained or snowed. Where you had an inground pool or an above-ground pool when this happened, the result is a mass of yucky water that settles on the pool cover. When it’s time to open the pool, remove all the water on the pool cover before you can remove the cover itself. That is why how to remove water from pool cover is always a trendy question online.
Why Should You Remove Water From Pool Cover the Right Way?
As you might have noticed, when you leave your pool cover on during heavy rains or snow, the pool cover’s water weight can be burdensome. It might pull your pool cover into the pool creating a more disastrous situation for you to deal with.
That can be one of the nastiest, dirtiest, and the most time-consuming task you will have to do in your backyard. However, if you have the ideal tool for the job, it can be effortless and straightforward.
Some people fool themselves into thinking they can lift the cover out with the ideal for pouring all the water out once lifted. You have ever tried this, then you know it’s a false theory that shouldn’t be attempted.
Despite the appearance, an inch of water level spread all over the pool cover concentrates and becomes one dense mass impossible to lift and remove. Most of the large pool covers can have more than an inch of water, and the total weight can be staggering; that’s something impossible to pick up or slid around.
If you tried it, all the brownish-black yucky water and the decaying plants get dumped in the clean water you’ve been salvaging with the cover. You shouldn’t kid yourself that you can muscle the cover, and the water offers the pool at a go.
You need to remove all the shady stuff and debris, water drained, and remove the cover intact. It’s a perfect way to handle the mess and, at the same time, prevent breaking your back or injuring yourself.
How Do Remove Water from Pool Cover?
When assessing how to remove water from pool cover, you need to know that you have to remove the debris, decaying matter, and remove the water. For that, there are three conventional methods that you can put to the test. I will discuss all the three here and list the steps to follow while removing the water with each technique. You can decide to use;
#a) An electric pump
#b) A bucket
#c) Siphon with a hose
All the methods are proven to work quite well, but each way does have a drawback that I’ll look at as I continue.
a) Using a Pool Cover Pump
Most people use this method as it’s one of the effective traditional methods of removing water in a flooded ware. However, it’s an expensive method as you have to buy a pump and use electricity to power it. Today, there are specifically-designed pumps ideal for this job; of course, they are not cheap and might not be useful for anything else.
Here the best pool cover pump connects to a hose that you use to drain the water away to a directed location of your choosing. It does suck almost all the water from the cover, but not all; there is a small portion. The leaves, dirt, and decaying debris are also left on the cover, but removing them gets more manageable without the water. The trash might clog your pump, however, and necessitate maintenance cleaning once you finish ensuring the pump remains functional.
Steps on how to remove water from pool cover using the best pool cover pump:
The first step is to obtain the ideal electric pump. You must ensure you buy the right model ideal for the amount of water the cover has or collect.
Next is to connect the pump to the right power source; it can be a standard wall socket or a power generator, fuel, or solar, whichever is accessible for you.
Use the best handheld leaf skimmer to try and reduce the number of leaves floating on the water. Of course, you won’t be able to clean all the decayed matter with the skimmer; you will have to brush them off later.
Connect the pump to the best hose that will help you direct this dirty water to a more appropriate place like a pond or the city drainage line. You can also use the water to irrigate your backyard garden if not too dirty.
The next step is to turn on the pump and push the water away from your pool cover. Monitor the performance to prevent clogging.
You will need to brush the decaying debris and leave it out to a more appropriate disposing area using the best soft nylon pool brush. You can get the best outdoor dustbin for the job.
When done, you can now remove the cover carefully and effortless.
b) Bail Using a Bucket
Using a bucket tied to a rope is perhaps the most frustrating method of removing water from a pool cover. At least that is the last method I’d try. It’s never practical with larger pools with vast amounts of water. Yes, it can help reduce the amount of water on the pool cover, but you will have to use a ton of your effort and be forced to chase around the water for complete removal.
How does it work?
You prop up one side of the pool cover that is far away, or you can sink a bit to the side that’s closest to you to allow most water to collect with your reach.
You can now dip the bucket in and bring up water plus the debris and toss it off the cover.
The method is regarded as the easiest since you don’t have to deal with clogs and maintenance routines. And since you will be dipping the bucket inside, there is a chance you will get your hand dirty with the yucky, brown liquid, which is not an option for most folks. The water might even have bugs, bacteria, and other messy stuff, not forgetting super cold.
c) Using a Siphon Hose
Since pumps are somehow expensive and bucket can be ridiculous, many people prefer siphoning the water using a multipurpose garden hose as the best method on how to remove water from the pool cover. It’s an effective way that produces decent results and in a short time. The major downside of this method is that it requires a unique technique to get the water moving.
How is it done?
To get the technique right, you have two options:
#a) Sucking water through the hose
You can decide to suck on the hose with your mouth, of course risking to task the yucky water. The method is much faster, but you might end up tasting or swallowing the murk. The pipe must be dipped well in the water before you can start to suck.
#b) Filling the multipurpose garden hose with water and using gravity to pull it out
You can fill the hose with water, dip it inside the murky, and lay it down on the ground for the water to flow. Of course, the pool cover must be on a higher position that the place you will drain the water into. Here you’re working with the power of gravity and pressure inside the hose. It creates the pull needed to suck the water from the cover.
The two ways work with the same goal, to siphon the water. For these methods to be a success, you have to allow the water to flow freely and from high ground to low ground. Keep the hose inside the water until the water level runs low. When the hose starts to such air, the water flow will stop, and you might be left with some liquid that will need a different method to remove it completed.
Bonus: Pool Cover Siphon Pump
You can even decide to get a Pool Cover Siphon Pump model, an automatic pump with a siphon that stops when the water on your cover is completely drained. It works when you slide the siphoning tool. It’s a bit tiresome but productive. The cordless ideal eliminates cumbersome electrical cords.
I have given you three methods on how to remove water from the pool cover. I expect you to choose the most convenient one for you. The pump is the most ideal, but it’s expensive, and you have to deal with clogs and maintenance issues. The second method, the use of a bucket, can deliver results but for small pool covers, and you have to be ready to touch the murky. The third and final method, siphoning the water, is useful but for pool covers that are on a higher level than the draining area. So, it’s now up to you to decide the most appropriate. You