If you want an economical way to heat your pools, the heat pump pool heaters are the perfect option. You have to look for ones that are compatible with your pool.
Generally speaking, when searching for something like heat pump pool heaters for inground pools, there are quite a few options available. Not everyone understands the technical jargon of these pool heaters. That is why; I will help you out today.
I will speak about the best heat pump pool heaters for inground pools and help you understand why these are the best options. I will also share with you the answers to some of the FAQs and a buying guide to help you make the final decision.
Best Heat Pump Pool Heaters For Inground Pools For 2020
1. TRANE TR21174T Residential Pool Heat Pump
The option on top of my list can produce the heat of 110,000 Btu. It is highly durable and has a noiseless operation, which means that you can use it consistently. With titanium heat exchanger, the durability is on the higher side.
It consists of corrosion-resistant evaporator fin. It means that you need not worry about replacing any parts or wear and tear. On the outer side, the polymer cabinet can handle any weather, which is a definite advantage.
With the help of dual electronic thermostat, setting the right temperature is not a problem. The ease of control as well as the heavy-duty construction is the reason why it is on this list.
- Produces heat of 110,000 Btu
- Corrosion-resistant casing
- A digital thermostat on offer
- Incorporates titanium heat exchanger
- Low noise
- Limited customer support
2. Hayward HP31204T HeatPro Heat Pump
The heat pump pool heater which I’m speaking about now can generate 120,000 Btu. With the help of acoustic compressor cover, you need not worry about noise. It consists of corrosion-resistant evaporator fin, which means that you can use it in any weather.
With the help of titanium heat exchanger, the efficiency is on the higher side. When you look at the body panels of the outer casing, it consists of UV resistant body panels.
Additionally, the LED control panel helps you set the temperature. The efficiency is such that it consumes up to 80% less energy. When looking for an economical heat pump pool heater for inground pools, this is an option which you should consider.
- Heat rating of 120,000 Btu
- Reduces noise
- Corrosion-resistant evaporator fin
- High efficiency
- Digital control panel
- Cumbersome to get any replacement parts
If you’re looking for a small heat pump pool heater, this one with the heating capacity of 55,000 Btu per hour is a good option. It consists of a titanium heat exchanger, which increases its efficiency.
The best thing about this heat pump pool heater is that it is compatible with inground and aboveground pools. The installation procedure is easy and comes with the compression fittings.
It means that you will not have to spend a lot of time to integrate it. The sleek design does not occupy a significant amount of space either. There is a pressure gauge on offer to monitor the water circulation. These features make it a worthy contender.
- Compatible with inground and aboveground pools
- Titanium heat exchanger on offer
- Easy to connect
- Heat capacity is 55,000 Btu per hour
- The packaging needs improvement
4. Hayward HP50TA HeatPro Heat Pump
With a capacity of 50,000 BTU, this is an option which you cannot ignore. With the help of corrosion-resistant evaporator fin, you need not worry about replacements anytime soon. The titanium heat exchanger is the industry standard.
It is present in this heat pump pool heater as well. It increases the efficiency of the pool heater. With the help of UV resistant body panel, wear and tear is not a problem. The noise is on the lower side.
The control panel is easy to use. The stainless steel hardware means that you can install it in no time and it can last for a long time. The lightweight design allows you to move it around during installation. The convenience of this heat pump pool heater makes it a reliable option.
- Heating capacity is 50,000 Btu
- Incorporates titanium heat exchanger
- UV resistant body panel
- Easy to use
- Occasional humming noise
5. Pentair Ultratemp 460934 Pool Heat Pump
With the help of auto-set controls, you don’t need to worry about setting it up. It provides you the option to get water output at a consistent temperature to keep your pool ready to use. One of the main advantages of this heat pump pool heater is that it has self-diagnostic software.
In case of any problem, it can detect the problem on its own and also monitor the peak performance consistently. With the help of an LCD control panel, it is easy to use this heat pump. The self-diagnostic tool certainly provides it with an edge over others.
- Incorporates LCD
- Titanium heat exchanger on offer
- Comes along with auto set controls
- Consist of self-diagnostic software
- Installation is time-consuming
So, an easy way to heat your pool is by using these best heat pump pool heaters for inground pools. Before you make your buying decision, go through my buying guide below.
One of the essential aspects of the heat pump pool heaters for inground pools is the control panel. It allows you to set the temperature. You have to ensure that the unit which you are choosing has an easy to use control panel.
The casing will protect the components inside. So, it should be durable, and also the evaporator fin should be able to handle wear and tear as well. When that is the case, you need not worry about replacing the parts anytime soon.
In these units, the heating capacity is essential. If it has a heat generation capacity of above 50,000 Btu, it is a suitable option for you. The larger your pool, the higher should be the heating capacity.
Type of heat exchanger:
Most of these units derive the heat from the atmosphere and then transfer it to the water. That is why this mechanism, also known as the heat exchanging mechanism, is pretty crucial. The industry standard is the titanium heat exchanger. The titanium heat exchanger is durable and highly efficient. It means that you can get the water output at the desired temperature. That is why; you should prefer the units consisting of a titanium heat exchanger.
Once you check these four factors, it becomes easy to choose the best heat pump pool heaters for inground pools. I will now proceed to the FAQs.
How much does it cost to run a heat pump pool heater?
The cost to run a heat pump pool heater is between $ .60 and $ 1.5 per hour. That is because most of these heat pumps derive their heat from the atmosphere and transfer it to the water. They most probably do not consist of a heating element, which is why running them is quite economical.
What is the difference between a pool heater and heat pump?
The heat pool pumps derive heat from the outside atmosphere and transfer it to water. When you’re speaking about the pool heater, they usually have a heating element. That is why; the primary difference is in the way in which the heat generation takes place.
GLOBO POOL OVERVIEW:
So, if you’re looking to choose the best heat pump pool heaters for inground pools, these five options will suffice your requirement. I have researched these five options and tried most of them before compiling this list. That is why; you cannot go wrong with these options.
Related Buyer’s Guides and Globo Pool Review Lists: